Call (02) 9316 5111 or 0429 356 181
Accessories
Framed Walls
Cavity Brick
Under Floor
Concrete and Masonry
Roof Insulation
Factory
About Foilboard
Contact us
Home
Brochure

Accessories

AccessoriesFoilboard Australia Pty Ltd manufactures a range of fixing accessories tailored to suit many construction applications. These fixings ensure that the material will be installed correctly and maintain its thermal performance for the life of the application. Whether it is for timber or steel frame construction, underfloor applications and even commercial systems, Foilboard® has the right fixings to suit all applications. 

As a guide all bags of accessories are designed to cover 45-50m2 (15 sheets) per bag. Sheet sizes can vary (less than 1%).
For example, an area of 130m2 (residential wall – timber/steel frame excluding windows) will require;

  • 45 sheets of Foilboard® Insulation Panel (2440mm x 1200mm, 2.93m2 per sheet)
  • 3 bags of fasteners (Standard or Ultra)
  • 3 Rolls of Green UV PVC Tape

For traditional underfloor applications using timber joists at 450mm centres (130m2);

  • 45 sheets of Foilboard® Insulation Panel (2440mm x 1200mm, 2.93m2 per sheet)
  • 3 bags of Foilboard® Floor Saddles
  • 3 Rolls of Green UV PVC Tape 

For further information please contact the technical department at Foilboard Australia Pty Ltd


Foilboard® Standard Fasteners are a 50mm x 35mm plastic washer with nail pre punched used to fasten Foilboard® to timber frames. Standard Fasteners come with a 30mm nail suitable for Standard 10 and Super 15 Foilboard® Sheets. Foilboard recommends a fastener every 600mm.

Foilboard® Ultra Fasteners are a 
50mm x 35mm plastic washer with nail 
pre punched used to fasten Foilboard® 
to timber frames. Ultra Fasteners 
come with a 40mm nail suitable for Ultra 20 and Cathedral 25 Foilboard® Sheets. Foilboard recommends a fastener every 600mm.

Foilboard® Standard Steel Frame Fasteners are a 50mm x 35mm plastic washer with a self-tapping phillips head screw pre punched through used to fasten Foilboard® to steel frames. Standard Fasteners come with a 30mm nail suitable for Standard 10 and Super 15 Foilboard® Sheets. Foilboard recommends a fastener every 600mm.

Foilboard® Ultra Steel Frame Fasteners are a 50mm x 35mm plastic washer with a self-tapping phillips head screw pre punched through used to fasten Foilboard® to steel frames. Ultra Fasteners come with a 40mm nail suitable for Ultra 20 and Cathedral 25 Foilboard® Sheets. Foilboard recommends a fastener every 600mm.

Foilboard® also supply blank fasteners for that installation that needs a customized fastener. These are a 50mm x 35mm plastic washer with a hole in the centre to accomodate a customised fixing

Foilboard® Floor Saddles make underfloor insulating easy. Simply place the saddle over the floor joist and fasten with a nail or staple. Then slip the Foilboard® between the floor joists and clip into place.

Foilboard® is available in a range of thicknesses and sizes, therefore it is suitable for all applications.
10mm 2440 x 1200
10mm 2700 x 1200
15mm 2440 x 1200
15mm 2700 x 1200
20mm 2440 x 1200
25mm 2440 x 1200

Foilboard® Spacer Blocks have been designed to be used with double brick cavity walls to achieve a reflective airspace between the Foilboard® and the masonry. Simply slot the spacer block onto the brick tie to install.

Foilboard® supply tape for sealing all joins. The tape is a high temprature adhesive and is UV light resistant and is guaranteed to never deteriorate for the life of the installation.
Green PVC Joining tape is used when Foilboard® is not to be exposed.

Foilboard® recommends taping of all joins to ensure maximum insulating performance. Still air is an insulator, reflected still air even more so. Sealing joins stops airflow from travelling from one side of the Foilboard® to the other and is crucial to the overall performance of the installation. Aluminium tape is used when Foilboard® is to be exposed.

 


Foilboard Australia Pty Ltd
Address:
Unit 15, 453 Victoria St, Wetherill Park NSW  2164
Tel: (02) 9316 5111 Fax: (02) 9316 5119 Mobile: 0419 360 865
Email: info@foilboard-insulation.com.au

Website by: www.thenet.com.au